InFocus LP 250 - Manual (Page 9)

9
Adjusting the image
Adjust the height of the projector, if necessary, by pressing the release but-
ton to extend the foot.
Rotate the leveling foot, if necessary.
Position the projector the desired distance from the screen at a 90 degree
angle to the screen.
See page 38 for a table listing screen sizes and distances.
Adjust the zoom or focus.
If the image is not square, adjust the keystone using the buttons on the key-
pad.
Press the top Keystone button to reduce the upper part of the image, and
press the bottom Keystone button to reduce the lower part.
Adjust the Contrast or Brightness in the Picture menu.
See page 25 for help with the menus.
adjust height
adjust distance
adjust zoom and focus zoom
focus
adjust keystone
adjust Picture menu
p5p7 manual.fm Page 9 Thursday, January 9, 2003 9:46 AM