2 vb example (reading an analog input value) – ICP DAS USA 8KE8 User Manual
Page 42
Advertising
4.3.2 VB Example (Reading an analog input value)
The following is an example of reading analog values from an I-87017 inserted in slot 0 of
an 8kE4/8KE8.
Step 1: Wire the 8430/8830/8KE4/8KE8 and configure its network settings (IP, Mask,
Gateway)
Step 2: Run the VxComm Utility to create a virtual COM port (e.g. COM3) to map the
8430/8830/8KE4/8KE8
Step 3: Run the DCON Utility to configure the I/O modules
Step 4: Run VB and create a new project (.exe project)
Step 5: Add I7000.bas to the project
Step 6: Arrange all the components on the form
8430/8830/8KE4/8KE8 User’s manual, Jan 2005, Version 1.0, 8MS-002-10 ----- 42
Advertising