ICP DAS USA 8KE8 - Manual (Page 71)

B.1 Command Set
The full DCON protocol command sets for i-8000 series’ can be found in
CD:\Napdos\DCON\IO_Module\
ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/dcon/io_module/
Frequently used Command table reference:
Command Command Description
$AAM Reads the Module Name
$AAF Reads the Firmware Version
#AASi Reads the analog input or counter / frequency values for all channels
of a specified slot
#AASiCj Reads the analog input or counter/frequency module data from
specified slot and the specified channel in the I-8000 unit.
#AASiCj(data) Sets the analog voltage output module data from the specified slot
and channel in the I-8000 unit. The data format is in engineering units
only.
#AASi6 Read Digital input and output status at specified slot
#AASi00(data) Sets the multiple Digital output of a specified slot
# AASiBjDS
Sets the single Digital output of a specified slot
8430/8830/8KE4/8KE8 User’s manual, Jan 2005, Version 1.0, 8MS-002-10 ----- 71