ICP DAS USA 8KE8 - Manual (Page 83)

Appendix D: i-8K and i-87K series I/O modules
The DCON firmware (DCON_nnn.exe and E10M_nnn.exe) supports both 8K and 87K
series I/O modules. The two series I/O modules can be plug in same I-8000 MCU. The
modules for DI, DO, DIO, AI, AO and Counter/Frequency purpose are supported. Other
modules such as multi-serial port (8112, 8144, 8142, 8144), MMC(8073), motion (8090,
8091) are not supported. The file in the shipped CD lists details.
CD:\Napdos\Driver\DCON_Utility\DCON_Utility_Module_List.htm
The DCON firmware only accepts 4 digits numbers. Thus both 8K and 87K series are
recognized as 4 digits numbers. When using the DCON Utility to search I/O modules, the
screen shown as following:
8430/8830/8KE4/8KE8 User’s manual, Jan 2005, Version 1.0, 8MS-002-10 ----- 83