Intel SE7520BD2 User Manual
Page 27
Server Board Features
27
For memory on-line sparing, one DIMM per channel is used as the memory spare. If a DIMM
begins to fail, the content of the failing DIMM is copied to the spare DIMM in that channel. When
all of the data is copied to the spare DIMM, the primary DIMM is removed from service and the
spare DIMM takes its place. When memory on-line sparing is used, the spare DIMMs must be
equal to or larger than the largest in-service DIMM in that channel.
For additional information, see the
Power Supply
The minimum power supply required depends on the server chassis into which the server board is
installed. Your supply must provide a minimum of 1.2 A of 5 V standby current or the board will
not boot.
For the Intel Entry Server Chassis SC5295-E DP, a minimum 450W power supply is required.
For the Intel Entry Server Chassis SC5295-E BRP, a minimum 500W power supply is required.
For the Intel Entry Server Chassis SC5300, a minimum 600W power supply is required.
For the Intel Entry Server Chassis SC5275-E, a minimum 600W power supply is required.
Use the power budget tool to determine the minimum power supply for your system, based on all
installed components. For a link to the power budget utility, see “