Hardware installations and upgrades, Before you begin, Tools and supplies needed – Intel SE7520BD2 User Manual
Page 28: Installing and removing memory, 2 hardware installations and upgrades
Intel® Server Board SE7520BD2 User Guide
28
2 Hardware Installations and Upgrades
Before You Begin
Before working with your server product, pay close attention to the
at
the beginning of this manual.
✏
NOTES
Most diagrams in this manual show product code SE7520BD2. Where
necessary to complete a procedure, differences are noted.
Tools and Supplies Needed
Phillips
*
(cross head) screwdriver (#1 bit and #2 bit)
Needle-nosed pliers
A ruler
Pen or pencil
Anti-static wrist strap and conductive foam pad (recommended)
Installing and Removing Memory
The silkscreen on the board for the DIMMs displays DIMM1B, DIMM1A, DIMM2B, DIMM2A,
DIMM3B, DIMM3A starting from the edge of the board. See “
for a discussion of the
memory requirements and options. See “
Additional Information and Software
” for a link to the list
of tested DIMMs for this server board.