Intel SE7520BD2 - Manual (Page 32)

Hardware Installations and Upgrades
32
7. Lower the socket lever completely.
TP00865
Figure 9. Closing Socket Lever
Installing the Heat Sink(s)
1. The heat sink has Thermal Interface Material (TIM) located on the bottom of it. Use caution
when you unpack the heat sink so you do not damage the TIM.
2. Set the heat sink over the processor, lining up the four captive screws with the four posts
surrounding the processor.
3. Loosely screw in the captive screws on the heat sink corners in a diagonal manner. Do not fully
tighten one screw before tightening another.
4. Gradually and equally tighten each captive screw until all screws are tight.
✏
NOTE
Boxed processor thermal solutions differ depending on the chassis. See the
boxed processor documentation for specifc instructions for the thermal
solution.