Intel EPS1U - Manual (Page 8)

SSI
EPS1U Power Supply Design Guide, V1.1
4.2 Alternate Enclosure
STATUS
Small Power Form Factor
Systems may require a smaller power supply enclosure. Figure 2 details a smaller power supply enclosure for
such systems. This form factor accommodates power levels of 250W and 125W. The supply will provide output
power via a wire harness out the interior face of the supply. Refer to the Entry Electronics Bay Specification at
the SSI web site (
http://www.ssiforum.org/docs/entry_elecbay_spec_v2_0.pdf ) for possible output connector
configurations. Due to different system board layouts the wire harness length may vary.
Figure 2: Alternate Enclosure Drawing
215.0 +/-0.2
Interior Face
40.0 +0.2/-0.5
Exterior Face
face
106.0 +/- 0.2
Fan
IEC Connector
Fan
AC I/P
Bi-Color LED
(PWR/Fail)
IEC Connector
Center Line
53.0 +/- 0.2
16.4 +/- 0.2
IEC Connector
Center Line
All dimensions are in millimeters.