Intel D865GVHZ - Manual (Page 51)

51
4 Using the BIOS Setup Program
The BIOS Setup program can be used to view and change the BIOS settings for the computer. The
BIOS Setup program is accessed by pressing the <F2> key after the Power-On Self-Test (POST)
memory test begins and before the operating system boot begins.
NOTE
The BIOS Setup menus described in this section may not show the latest settings. For the latest
BIOS settings, refer to the Intel
® Desktop Board D865GVHZ Technical Product Specification or
the Intel World Wide Web site:
http://support.intel.com/support/motherboards/desktop
NOTE
For reference purposes, you should write down the current Setup settings. When you make changes
to the settings, update this record.
NOTE
The Setup menus described in this section apply to the desktop boards with BIOS identifier
BF865.10A.86A. Boards with other BIOS identifiers might have differences in some of the
Setup menu screens.
Table 9 shows the BIOS Setup program menu bar.
Table 9. BIOS Setup Program Menu Bar
Maintenance Main Advanced Security Power Boot Exit
Clears passwords
and Boot Integrity
Service (BIS)*
credentials, and
configures extended
configuration
memory settings Allocates
resources for
hardware
components Configures
advanced
features
available
through the
chipset Sets passwords
and security
features Configures
power
management
features Selects boot
options and
power supply
controls Saves or
discards
changes to set
program options
* For information about the BIS, refer to the Intel Web site at:
http://developer.intel.com/design/security/index1.htm