Intel D865GVHZ - Manual (Page 77)

Using the BIOS Setup Program
77
Exit Menu
Main Advanced Security Power Boot Exit
Exit Saving Changes
Exit Discarding Changes
Load Optimal Defaults
Load Custom Defaults
Save Custom Defaults
Discard Changes
Select Screen
Select Item
Enter Select Sub-Menu
F1 General Help
P9 Setup Defaults
F10 Save and Exit
ESC Exit
The menu shown in Table 33 is used to exit the BIOS Setup program, saving changes, and loading
and saving defaults.
Table 33. Exit Menu
Feature Description
Exit Saving Changes Exits and saves the changes in CMOS SRAM.
Exit Discarding Changes Exits without saving any changes made in the BIOS Setup program.
Load Optimal Defaults Loads optimal defaults.
Load Custom Defaults Loads the custom defaults for Setup options.
Save Custom Defaults Saves the current values as custom defaults. Normally, the BIOS reads the
Setup values from flash memory. If this memory is corrupted, the BIOS reads the
custom defaults. If no custom defaults are set, the BIOS reads the factory
defaults.
Discard Changes Discards changes without exiting Setup. The option values present when the
computer was turned on are used.