Intel D865GVHZ - Manual (Page 69)

Using the BIOS Setup Program
69
Security Menu
Main Advanced Security Power Boot Exit
Supervisor Password : Not Installed
User Password : Not Installed
Set Supervisor Password
Set User Password
Chassis Intrusion [Disabled]
Select Screen
Select Item
Enter Select Sub-Menu
F1 General Help
P9 Setup Defaults
F10 Save and Exit
ESC Exit
The menu shown in Table 25 is used to set passwords and security features.
Table 25. Security Menu
If no password entered previously:
Feature Options Description
Supervisor Password No options Reports if there is a supervisor password set.
User Password No options Reports if there is a user password set.
Set Supervisor Password Password can be up to seven
alphanumeric characters. Specifies the supervisor password.
Set User Password Password can be up to seven
alphanumeric characters. Specifies the user password.
Clear User Password
(Note 1)
•
Yes (default)
•
No
Clears the user password.
User access Level
(Note 2)
•
Limited
•
No access
•
View Only
•
Full (default)
Sets BIOS Setup Utility access rights for
user level.
Chassis Intrusion
•
Disabled (default)
•
Enabled
Enables or disables the chassis intrusion
feature.
Notes:
1. This feature appears only if a user password has been set.
2. This feature appears only if both a user password and a supervisor password have been set.