IMC Networks Giga-AcessEtherLinx-II - Manual (Page 32)

29
Using Telnet
Assign the Giga-AccessEtherLinX-II an IP Address or use the default IP Address
10.10.10.10, subnet mask 255.0.0.0 before using a Telnet session. All configurations
done via the console port can also be performed using Telnet. The user should only
open one Telnet or RS232 console session at a time. Do not use an RS232 console
session and a Telnet session at the same time as unexpected results may occur.
LED Operation
Downlink Ports
LNK/ACT Glows green when link is established on port.
Blinks green during data activity on port.
FDX/COL Glows green when port is operating in Full-Duplex.
Blinks green when collisions occur on port.
No display when port is operating in HDX