IMC Networks Giga-AcessEtherLinx-II - Manual (Page 9)

6
Main Configuration Screen
After running through an initial self test, the screen will display: Press Enter for Device
Configuration. Press Enter to be taken to the main configuration screen.
The Main Configuration screen contains the following:
Saved Values — displays changes made during current session.
• IP Address (Should be assigned during initial configuration)
• Subnet Mask (Should be assigned during initial configuration)
• Default Gateway
Current Values — displays values currently in use.
• IP Address (IP address of SNMP agent)
• Subnet Mask (mask to define IP subnet agent is connected to)
• Default Gateway (default router for IP traffic outside subnet)
Command List
• I = Enter New Saved Parameter Values
• P = Change Password
• T = New Trap Destination
• K = Remove ALL Trap Destinations
• C = New Community String
• U = Delete ALL Community Strings
• D = Enable/Disable DHCP
• E = End Session
• Space Bar = Opens device specific configuration options