Ip single line adapter, Itp and sip supported features – Inter-Tel CS-5400 User Manual

Page 101

Advertising
background image

Hardware and Endpoints

INTER-TEL

®

CS-5200/5400 ADMINISTRATOR GUIDE, ISSUE 1.1 – August 2005

AudioCodes MP-104 SIP Gateway

Page 83

Are transparent to the system user because they perform like any other CO trunk in the
system.

Reside in CO trunk groups like other trunks. SIP trunk calls can be routed using Auto-
matic Route Selection.

SIP gateway trunks support:

Transferring trunks, putting trunks on hold, and connecting trunks to conferences simi-
lar to other CO trunks in the system.

Making and receiving calls by any endpoint.

Peer-to-peer (P2P) audio by IP phones.

Dialing Emergency Call number sequences, such as 911 in the US and 999, 112, and
others in Europe.

The MP-104 does not support:

Pause digits. These digits are used to program a Speed Dial number or other digit string.

SIP registration, which is used for authentication purposes.

IP Single Line Adapter

The IP Single Line Adapter (SLA) provides an interface between the standard single line end-
point and a 10Base-T network. It allows you to make phone calls through the IP network. The
IP SLA has an Ethernet IEEE 802.3 10Mbps UTP interface. The IP SLA uses flash memory
and its software can be updated over the LAN.

ITP and SIP Supported Features

Users can access most features by entering a feature code using the endpoint’s dialpad buttons.
The following table shows the station features (and default feature codes) that are supported
for phones operating in ITP mode and SIP mode.

Support for some features varies by endpoint. For a complete list of supported features refer to
the appropriate user guide. For a summary of user guides and part numbers, refer to Table ,
"Phone User Guides" on

page 6

.

NOTE

SIP trunks do not support the Direct Inward System Access (DISA) or speed
dial features.

Table 11.

ITP and SIP Features and Feature Codes

FEATURE NAME

FEATURE

CODE

ITP MODE

SIP MODE

= supported; x = not supported

Account Code – Following Calls

391

x

Account Code – Optional

390

x

ACD Agent Log In

326

x

ACD Agent Log Out

327

x

ACD Agent Log In/Out

328

x

ACD Agent Wrap-Up Terminate

329

x

Agent Help Request

375

x

Agent Help Reject

376

x

Advertising
This manual is related to the following products: