Inter-Tel CS-5400 - Manual (Page 143)

System Features
INTER-TEL
®
CS-5200/5400 ADMINISTRATOR GUIDE, ISSUE 1.1 – August 2005
Administrator Feature Codes
Page 125
Administrator Feature Codes
The following feature codes may be used only at designated Administrator endpoints. Non-
Administrator endpoint users hear reorder tones if they attempt to use these feature codes.
Station Monitor 321 (Hunt Group supervisors only) Allows a desig-
nated hunt group supervisor to monitor a call
of anyone in the associated hunt group.
Station Speed Dial
Station Speed Dial Programming 382
383 Dials/programs one of the 10 Station Speed
Dial numbers when followed by a location
code (0–9). Inter-Tel endpoints use the Station
Speed Dial button plus a location code for pro-
gramming and dialing, or they can program
Speed Dial buttons for one-button dialing.
Steal 387 Allows the supervisor to take away a call from
the hunt group member/agent.
Switch Keymap 399 (Not used on single line endpoints) This
allows an endpoint user to switch between
standard and alternate keymaps.
System Forward Enable
System Forward Disable
System Forward On/Off 352
353
354 Enables or disables the database-pro-
grammed System Forwarding feature for this
endpoint. The on/off feature code can be used
to toggle the feature on or off.
System Speed Dial 381 Dials one of the 1000 System Speed Dial
phone numbers when followed by a location
code (000–999). Also used for reviewing Sys-
tem Speed Dial numbers.
Transfer to Hold 346 Transfers a call to another endpoint and
places it on individual hold so that it does not
ring or send call waiting signals until it recalls.
Transfer to Ring 345 Transfers a call to another endpoint or to an
outside phone number.
Table 19. Endpoint Feature Code Definitions(Continued)
FEATURE NAME CODE DEFINITION
Table 20. Administrator Feature Code Definitions
FEATURE NAME
CODE
(US/EUROPE)
DEFINITION
Clear Network Alarm 9851 Clears network-wide alarms on every node
in the network, but will not affect system
alarms. The Clear Network Alarm feature
code may be entered on any node in the
network, but the Send Network Alarms flag
must be set for the administrator to clear
alarms on other nodes in the network.
Clear System Alarm 9850 Clears all local and network-wide system
alarm displays on your node.