Inter-Tel CS-5400 - Manual (Page 184)

System Features
INTER-TEL
®
CS-5200/5400 ADMINISTRATOR GUIDE, ISSUE 1.1 – August 2005
Page 166 Inter-Tel Endpoint Features
Inter-Tel Endpoint Features
The following sections describe how to use Inter-Tel endpoint features.
Volume Controls
On Inter-Tel endpoints, volume is controlled in the following ways:
•
On Model 8600, 8620/8622, and 8660 endpoints, illustrations of speakers ( and )
represent higher and lower volume levels. Press the end of the button to lower the
volume and the end of the button to raise the volume.
•
On the Executive, Standard, and Axxess Basic Phones, an illustration on the button
(that looks like this
) represents higher and lower volume levels. Press the
lower end in place of the down arrow and the higher end in place of the up arrow.
•
On the Professional, Associate, and Eclipse Basic Phones, arrows on the key represents
higher and lower volume levels.
•
The other Inter-Tel endpoints have separate VOL UP and VOL DOWN keys.
To change volumes on an Inter-Tel endpoint:
Press the appropriate button to raise or lower the volume, using one of the procedures listed
below. A confirmation tone will alert you when you have reached the highest or lowest possi-
ble volume. On display endpoints, the display shows VOLUME LEVEL X. The “X” repre-
sents the level and changes as the volume is raised or lowered.
•
To change handset intercom voice volume: Adjust the volume while on an off-hook
(handset) intercom call.
•
To change handsfree intercom voice and paging volume: Adjust the volume while on
an on-hook (speakerphone) intercom call.
•
To change handset outside call voice volume: Adjust the volume while on an off-
hook (handset) outside call.
•
To change handsfree outside call voice volume: Adjust the volume while on an on-
hook (speakerphone) outside call.
•
To change headset intercom voice volume: (Model 8620 and 8660 endpoints only)
Adjust the volume while using the headset and on an intercom call.
•
To change background music volume: Adjust the volume while listening to music
through the endpoint speaker. The selected background music volume level is automati-
cally saved.
•
To change alerting tone (ring tone) volume: Adjust the volume while the endpoint is
ringing or idle. OR, while on-hook, press both edges of the Volume button to hear the
currently programmed volume. Then adjust the volume.
•
To change handset progress tone volume: Press the desired arrow while listening to
intercom dial tone through the handset.
•
To change speakerphone progress tone volume: Press the desired arrow while listen-
ing to intercom dial tone through the speakerphone.
3. To save the setting on a digital endpoint: Press both edges of the Volume button at the
same time. The display shows VOLUME SAVED.
If this step is not performed, the phone will return to the previous volume level when
the call or tone ends, except for the ringing alert tone or background music volume,
which is automatically saved at the most recent volume level.
NOTE
The volume adjustment button on the digital endpoints also can be used
for scrolling through displays.