IBM DM-10 - Manual (Page 22)

22
2
To enhance sound quality during recording, use the Remote Controller Microphone or an optional
external microphone. If a stereo microphone is used, recording in SHQ (Stereo High-Quality)
mode is possible. Please note, when a microphone is connected to the jack on the recorder, the
jack functional switch-over is made automatically.
Recording with External Microphone
1 Make sure that the recorder has stopped.
2 Connect to the jack on the recorder.
If an external microphone is connected to the jack on the
recorder, the built-in microphone is disabled.
Applicable external microphones
●
Remote controller microphone: MR12
MR12 contains a non-directional microphone. With a clip, you can attach
the microphone on your jacket's pocket, etc. This microphone is used to
record your voice or voices of people close to you.
●
Noise-Cancellation microphone: ME12 (optional)
(Dictation microphone)
This microphone is used to record your own voice while minimizing
surrounding noise.
●
Stereo microphone: ME50S (optional)
When using a stereo microphone, the recorder will switch-over to SHQ
mode automatically and recording in WMA format, noise-free sound can
be accomplished. Stereo recording is only possible in SHQ mode.
..............................................................................................................
Notes
• Do not insert or remove a microphone into or from the jack while recording.
• If an earphone is connected to the remote controller recording is not
possible.
• If an earphone is connected to the remote controller EAR jack while
recording, recording will stop automatically.
Recording with External Microphone