IBM DM-10 - Manual (Page 31)

31
2
REC MODE
MIC SENSE
LOCK
BACK SPACE
ALL PLAY
TIME&DATE
FORMAT
CONTRAST
BEEP
BACKLIGHT
COMMENT
FOLDER NAME
ALARM
VCVA
EXT.INPUT
Menu List (VOICE mode)
Selection from HQ, SP and LP modes.
Notes
• Part of the menu is common
with the MUSIC mode.
• If you press the STOP button
or the REC button, during a
menu setup operation, the
recorder will stop and apply
the items that were set to that
point.
• The recorder will stop if you
leave it idle for 3 minutes during
a menu setup operation, when
a selected item is not applied.
Locking files setting. Selection between ON
(locked) and OFF (unlocked).
Back space setting. Selection from OFF,
1 SEC SKIP and 2 SEC SKIP.
Continuous playback setting. Selection
between ON (enabled) and OFF (disabled).
Time/Date setting. In order of hour, minute,
year, month and day (
☞P.12).
Recorder formatting.
LCD contrast adjustment. Adjust the level from
1 to 12.
System sounds setting. Selection between ON
(enabled) and OFF (disabled).
Backlight setting. Selection between ON
(enabled) and OFF (disabled).
Assigning file comments.
Folder naming.
Alarm playback setting. Selection between ON
(enabled) and OFF (disabled).
Press and hold the MENU button for 1 second or longer.
Mic sense setting (
☞P.24). Selection between
CONFERENCE (high-sensitivity mode) and
DICTATION (low-sensitivity mode).
VCVA setting (
☞P.20). Switch between ON
(enabled) and OFF (disabled).
Press the FF button
or REW button.
Menu List (VOICE mode)
EXT.INPUT setting. Selection from AUTO
SELECT, STEREO INPUT and MONAURAL
INPUT.