IBM DM-10 - Manual (Page 49)

49
4
5 Press the FF or REW button to select
the bass effect level.
The levels switch in the following rotation,
“OFF” “LOW” “MIDDLE” “HIGH”.
6 Press the PLAY button to save your
setting.
7 Press the STOP button to close the
menu.
If you wish to set other menus, press and
hold the PLAY button for more than 1
second without pressing the STOP button.
Increasing the WOW effect (WOW EFFECT)
T r u B a s s
5
6
5
6
7
7
If you want to change the WOW level while listening to sound,
press the MENU button for at least 1 second during playback
and then start procedure from step 3.
.......................................................................................................
Notes
• Both the surround effect and bass effect are OFF as the WOW default
settings.
• If there is no action taken within 8 seconds during the WOW settings
during playback, the recorder will revert to normal play.
• “ WOW ” will be displayed on the screen if the surround effect or the
bass effect is set.
• The WOW effect will be weakened if the bit rate for any music file is
less than 32 kbps.
• Depending on the song, the WOW effect will be heightened, and
may sound like noise. If this happens, adjust the WOW effect.