Icom COMMUNICATION RECEIVER IC PCR100 - Manual (Page 21)

17
3
BASIC OPERATION
■ Setting a frequency
Depending on the situation, the receive frequency can be set
using the following methods. Frequencies can be set from
0.01000 to 1300.00000 MHz.
D Using the tuning dial
➥ Click the tuning dial with the sub mouse button to increase
the frequency; click the tuning dial with the main mouse
button to decrease the frequency.
• The frequency changes according to the preset tuning steps. See
the next page for selecting the tuning step.
• When clicking and holding either button the frequency scrolls up
or down.
D Using the simple function receiver screen
q Click [MENU] and select the ‘Function Controller’ when it
is not displayed.
w Click [FREQ J ] or [FREQ K ] on the function controller to
set the frequency according to the selected tuning step.
• The frequency changes according to the selected tuning steps.
See the next page for selecting the tuning step.
• When clicking and holding either button the frequency scrolls up
or down.
D Using the keypad
➥ Click the desired numeral buttons, then click [ENT] to set
the frequency.
• When making a mistake while inputting a frequency, click [CE] to
clear the input and return to the previous frequency.
• When you want to change the 100 kHz digit and below, click [•]
first, then the numeral buttons and then [ENT].
• When you want to set the 100 kHz digit and below to 0, input the
MHz digits and then click [ENT].
• When inputting a frequency outside of the allowed receive fre-
quency range, the previously selected frequency is automatically
selected after clicking [ENT].
D Using the PC keyboard
➥ Push the desired numeral keys, then push [Enter] to set the
frequency.
• When inputting from the keyboard, click anywhere in the receiver
screen first, then begin inputting from the keyboard.
• When making a mistake while inputting a frequency, push [Esc]
to clear the input and return to the previous frequency.
• When you want to change the 100 kHz digit and below, push [•]
first, then the numeral keys and then [Enter].
• When you want to set the 100 kHz digit and below to 0, input the
MHz digits and then push [Enter].
• Push [ b ] or [ a ] to set the frequency according to the selected
tuning step.
• When inputting a frequency outside of the allowed receive fre-
quency range, the previously selected frequency is automatically
selected after clicking [Enter].