Icom COMMUNICATION RECEIVER IC PCR100 - Manual (Page 30)

26
5
SCAN OPERATION
■ Scan types Up to 20 programmed scan ranges, memory scan, memory
select scan, memory skip scan, mode select memory scan
and auto memory write scan provide scanning versatility.
PROGRAMMED SCAN
(p. 27) Repeatedly scans between
two user-programmed fre-
quencies. Used for checking
for frequencies within a
specified range such as
repeater output frequencies,
etc.
Scan
Jump
Scan edges
Scan edge Scan edge
SELECT MEMORY SCAN
(p. 31) Repeatedly scans only select
memory channels within a
memory bank. This function
can be turned ON/OFF in
[Memory SCAN] tab. Select
channels can be set in the
memory list screen.
Not yet
programmed
ch 50
ch 1 ch 2 ch 3
ch 4
ch 5 ch 6 ch 49
Not yet programmed
ch 50
ch 1 ch 2 ch 3
ch 4
ch 5 ch 6 ch 49
MEMORY SKIP SCAN
(p. 31) Skips unwanted memory
channels that inconvenient-
ly stop scanning. This func-
tion can be turned ON/OFF
in [Memory SCAN] tab.
Skip channels can be set in
the memory list screen.
Not yet
programmed
ch 50
ch 1 ch 2 ch 3
ch 4
ch 5 ch 6 ch 49
MEMORY SCAN
(p. 30) Repeatedly scans memory
channels within a memory
bank (1–20).
Not yet
programmed
SKIP
ch 50
ch 1 ch 2 ch 3
SEL
SEL
SKIP
SEL SEL
SEL
SEL
MODE SELECT MEMORY
SCAN (p. 31) Repeatedly scans only
selected mode channels
within a memory bank. This
function can be set in
[Memory SCAN] tab of the
setting screen.
FM
AM
FM FM FM
FM
FM
ch 5 ch 6 ch 49
ch 4
AUTO MEMORY WRITE
SCAN (p. 29) The frequencies that the
programmed scan stops
are automatically program-
med into a selected memo-
ry bank.
ch 1 ch 2
Pause
Program Program
Pause
Scan