Icom COMMUNICATION RECEIVER IC PCR100 - Manual (Page 8)

4
1
INSTALLATION
■ Software installation
NOTE: Before using the program, make a backup copy of
the original disk. After making a backup copy, keep the
original disk in a safe place.
NOTE: Depending on the Windows ® system files, the PC
may require rebooting. In this case, repeat the installation
from the beginning.
D Installation
q Boot up Windows.
• Quit all applications when windows is running.
w Insert the backup disk 1 into the appropriate floppy drive.
e Select ‘Run’ from the [Start] menu.
r Type the setup program name with full path name, then
press the [Enter] key. (A:\SETUP [Enter])
t Following dialog appears. Follow the prompts.
y Program group ‘IC-PCR100’ appears in the ‘Programs’
folder of the [Start] menu.
D Software update information
Software update information will be available at the Icom
America home page:
http://www.icomamerica.com/