Replacement parts/accessories – Invacare BAR750 User Manual

Page 12

Advertising
background image

SECTION 1—GENERAL GUIDELINES

BAR750

12

Part No 1143215

ƽ ENTRAPMENT WARNING

Proper patient assessment and monitoring, and proper maintenance and use of

equipment is required to reduce the risk of entrapment. Variations in bed rail

dimensions, and mattress thickness, size or density could increase the risk of

entrapment. Visit the FDA website at http://www.fda.gov to learn about the risks of

entrapment. Review “A Guide to Bed Safety”, published by the Hospital Bed Safety

Workgroup, located at www.invacare.com. Use the link located under each bed rail

product entry to access this bed safety guide.
Refer to the owners manuals for beds and rails for additional product and safety

information.
After any adjustments, repair or service and before use, make sure all attaching

hardware is tightened securely. Assist rails with dimensions different from the

original equipment supplied or specified by the bed manufacturer may not be

interchangeable and may result in entrapment or other injury.
Mattress MUST fit bed frame and assist rails snugly to reduce the risk of entrap-

ment.

Replacement Parts/Accessories

Use masked or nasal type oxygen administering equipment only in conjunction with the 
electric bed. The use of any other type of oxygen administering equipment can result in a 
fire hazard.

When using nasal or masked type oxygen administering equipment, the oxygen or air 
tubing MUST be routed and secured properly to ensure that the tubing does not become 
entangled and/or severed during normal operation of electric bed.

ALWAYS test to make sure that the bed rails are properly and securely in place before 
using the electric bed.

Invacare recommends that the mattress be centered on the bed frame. Otherwise, 
individuals may become entangled between the bed rail and the bed frame.

Physically challenged individuals who cannot prevent themselves from rolling/climbing 
out of the electric bed may require alternative safe means of restraint.

The bed rails DO NOT fall under any weight limitations. Bed rails can be deformed or 
broken if excessive side pressure is exerted on the bed rails. These bed rails are used for 
the purpose of preventing an individual from inadvertently rolling out of bed. The bed 
rails are not intended nor may be used for restraint purposes. If an individual is capable 
of injuring himself/herself, a physician or a healthcare professional should be consulted 
for alternative means of safe restraint.

After raising/lowering the head/foot end of the electric bed, check the distance between 
the bottom of the bed rail and the mattress. If there is excessive distance between the 
bottom of the bed rail and the mattress in which individuals may become entangled, 
adjust the height of the bed rail (if applicable), or provide alternative means of patient 
protection.

Advertising