Ingersoll-Rand PH30F-XXX-XXX-C - Manual (Page 7)

PH30F-XXX-XXX-C (en) Page 7 of 8
PARTS LIST / PH30F-XXX-XXX-C AIR SECTION
) ASSEMBLY TORQUE REQUIREMENTS (
NOTE: DO NOT OVERTIGHTEN FASTENERS.
ALL FASTENERS ARE METRIC.
(105) Screw, 15 - 20 in. lbs (1.7 - 2.3 Nm).
(134) Screw, 40 - 50 in. lbs (4.5 - 5.6 Nm).
LUBRICATION / SEALANTS
f Apply Lubriplate FML-2 grease to all “O” rings, “U” cups
and mating parts.
j Apply anti-seize compound to threads and bolt and
nut fl ange heads which contact pump case when us-
ing stainless steel fasteners.
Figure 3
200
138
111
139
137
136
107
236
232 233 232 176
134
133
135
105
107
166 132 243 244 199 141 140
167
121
174
118 173 169 168
170
171
172
121
173
118
101
103
174
127
201
MAJOR VALVE
PILOT VALVE
PART GROUP
Optional 94117 Muffler
43
A replacement Major Valve Service Assembly is available separately, which includes the following:
637374-6: 105 (4), 107 (2), 111, 132, 135, 136, 137, 138, 139, 140, 141, 166, 176 (2), 199, 200, 232 (2), 233, 236 (4), 243 and 244.