Integra DPC-6.1 - Manual (Page 11)

11
Getting Started
Connections
Function Setup
Advanced Playback
Others
Basic Playback
Connecting to an Audio System and TV
with COMPONENT VIDEO Inputs
■ It is also possible to “split” the audio and video signals by sending the video signal to your TV set and
the audio signal to an amplifier. Doing so has the advantage that you can:
• Listen to the sound of audio CDs and DVD videos in stereo (via the amplifier) or in Dolby Digital, Dolby Pro Logic
Surround or DTS (see pages 12, 13);
• Enjoy a better picture quality of DVD videos on a TV equipped with Component Video inputs than would be
possible via an S-video connection.
Notes
• See also the manuals of your audio amplifier and TV set for establishing the correct connections and making the required
settings.
• Before connecting the DVD Changer to other equipment, be sure to turn off the power and unplug all components from the
wall outlet.
• This DVD Changer outputs a very dynamic audio signal. Be sure to set the amplifier’s volume to a moderate listening level to
avoid damaging your speakers due to sudden volume surges.
• Switch off the amplifier or select another input source before connecting or disconnecting the DVD Changer’s power cable. If
you leave the amplifier power on, the speakers may be damaged.
Your DPC-6.1 provides several options for audio playback: you can use the analog or one of the digital audio
outputs. If your amplifier only provides analog inputs, use the DPC-6.1’s ANALOG OUTPUTs and select them via the on-
screen menu (“Analog 2ch”). See “Audio Settings” on page 36 for details.
■ COMPONENT VIDEO OUT (COLOR DIFFERENCE):
Some TVs or monitors are equipped with Color Difference inputs. Connecting the DPC-6.1 to these inputs allows you
to enjoy a better picture quality. Be sur e to match the DPC-6.1’s VIDEO OUTPUTs with the Component Video inputs of
your TV or monitor (see the illustration).
Actual labels for the Color Difference inputs may vary depending on the TV manufacturer (e.g. Y, B-Y , R-Y, etc.).
On some TVs or monitors, the color levels of the picture may be reduced slightly, or the tint may change. In such
cases, adjust the TV or monitor for optimum performance.
Note:
If you place the DVD Changer near a tuner or radio, the radio reception might be distorted due to interference. In this case, locate
the DPC-6.1 away from the tuner or radio.
COMPONENT
Y P B P R VIDEO S VIDEO
VIDEO OUTPUT
R
L
OPTICAL COAXIAL
DIGITAL
OUTPUT ANALOG
OUTPUT
AC INLET
Do not plug in
the power cable
until all connec-
tions have been
made.
To audio inputs
of the amplifier
Audio system
To Y
VIDEO
OUT To P B
VIDEO
OUT
To P R
VIDEO
OUT
(white) (red)
To
ANALOG
AUDIO OUT
(white)
(red)
TV or monitor with
component signal inputs
To Y video input
To P R video input
To P B video input
Signal flow
Audio connection cable
(Not supplied)
Component video cable (Not supplied)
Power cable
(included)
To wall
outlet
(See page 10)