Integra DPC-6.1 - Manual (Page 17)

17
Getting Started
Connections
Function Setup
Advanced Playback
Others
Basic Playback
DVD VCD DVD VCD CD
SLOW
SLOW
PLAY
STOP
PLAY
PLAY
STOP
1 2 3
5 6
7 8 9
+10 0
4
SLOW
PLAY
PAUSE/STEP
REMOTE CONTROLLER RC - 426DV
1 2 3
5 6
7 8 9
+10 0
4
STOP
PLAY
REMOTE CONTROLLER RC - 426DV
Slow-Motion Playback
DVD videos can be played back in slow motion. This is
done by reducing the playback speed.
Press the or SLOW button during
playback.
By pressing either button repeatedly,
you can cycle through the three
available playback speeds.
1/8 the 1/4 the 1/2 the
normal speed normal speed normal speed
TV screen
1/2 the 1/4 the 1/8 the
normal speed normal speed normal speed
TV screen
■ Resuming Normal Playback
Press the PLAY button to r esume
normal playback.
■ Using Frame Step DVD VCD
While playback is paused, you can
step forward one frame at a time by
pressing the PAUSE/STEP button.
Resuming Playback From the Desired Location
After stopping playback, you can either resume from the
location where it was stopped, or from the beginning of
the current title.
Press the STOP button at the location
where you want to halt playback.
The DVD Changer memorizes this location.
Press the PLAY button.
The DVD Changer resumes playback
from the location where playback was
stopped.
■ Resuming Playback from the Beginning of the
Current Title
If you do not wish to resume playback from the position
where it was stopped, proceed as follows. In this case,
playback will be started from the beginning of the last
title you played back, or from the beginning of the disc.
1. Stop playback by pressing the STOP button twice.
The second press of the STOP button
will clear the DVD Changer’s location
memory.
2. Press the PLAY button.
The location where playback is started
depends on the type of disc you are
using:
DVD video: Playback starts from the
beginning of the current title.
Video CDs/audio CDs: Playback starts
from the beginning of the disc.
• To resume playback a DVD video from the beginning
of the disc, press the STOP button, open and close
the disc tray by pressing the OPEN/CLOSE button,
then press the
PLAY button.
Notes:
• The DVD Changer’s location memory is also cleared when you:
– unplug the DVD Changer from the wall outlet after stopping
playback.
– open the disc drawer.
– adjust/change the Parental Lock function (see page 37) or
select another disc menu language (see page 34).
• Depending on the disc, playback may not be resumed at
the exact location where it was stopped.
• Other settings you change via the on-screen menu while a
location is memorized may be available only after the
memory is clear ed.
Only for the
DVD video
PAUSE/STEP
1
2
1/2 1/4 1/8
1/8 1/4 1/2
or