Integra MZA-4.7 - Manual (Page 27)

27
Programming Using IMC (Integra Music Center)—Continued
■ Source Control Alarm Clock Programming
If a KEY-5.7 keypad is connected to the MZA-4.7, then source control can also be included in an alarm preset.
In IMC’s main window; file open a KEY-5.7 keypad Window.
Select the connected Keypad’s zone in “Zone” tab.
If the Keypad is controlling a Preamplifier zone (which is in Independent Mode) then Left click “Preamp.”
Left clicks on the KEY-5.7 buttons cause the connected Keypad to send the buttons learnt IR commands.
“Repeats” determine how many times the IR command is sent on each button click.
In the preset setup window select “Macro.” Using the mouse with left clicks select the Keypad functions required; i.e.
“S1,” “1,” “2,” and “Play.”
The above sequence is entered into the macro window. Save and exit by selecting “Default.”
The Integra System is now programmed to Select the S1 source, and Play Disc 12 on the S1 source at 6:15am Monday
through to Friday.