Intermec EASYCODER PD4 - Manual (Page 27)

Intermec EasyCoder PD4—User’s Guide 17
Chapter 3—Starting Up
Direct Mode
The Direct Mode is the normal idle mode, where all commands from
external ports are interpreted and normal control key actions are per-
formed. During reception of data, this message is shown in the display:
In the Direct Mode, you can use the keys for the following purposes:
• Feed out one blank label or portion of continuous stock by pressing
the Feed key.
• Pause the Direct Mode by pressing the Pause key. When the Direct
Mode is paused, this message is displayed:
• Enter the Setup Mode by simultaneously pressing the Feed and Pause
keys (see Chapter 5).