Intermec EASYCODER PD4 - Manual (Page 3)

Intermec EasyCoder PD4—User’s Guide iii
FCC Notice (United States of America)
WARNING
This equipment generates, uses, and can radiate radio frequency energy
and if not installed and used in accordance with the instructions manual,
may cause interference to radio communications. It has been tested and
found to comply with the limits for a Class A computing device pursu-
ant to Subpart J of Part 15 of FCC Rules, which are designed to provide
reasonable protection against such interference when operated in a com-
mercial environment. Operation of this equipment in a residential area
is likely to cause interference in which case the user at his own expense
will be required to take whatever measures may be required to correct the
interference.
EMS and EMI Compliance Statement
This equipment has been tested and passed with the requirements relat-
ing to electromagnetic compatibility based on the standards EN50081-1
(EN55022 CLASS A) and EN61000-4-2/-3/-4/-5/-6/-8/-11 (IEC Teil
2,3,4). The equipment also tested and passed in accordance with the
European Standard EN55022 for the both Radiated and Conducted
emissions limits.