Intermec EASYCODER PD4 - Manual (Page 44)

34 Intermec EasyCoder PD4—User’s Guide
Chapter 5—Printing
Controlling the Printing
The printing is initiated from the host computer, but the operator can
control batch printing, that is, the printing of multiple labels.
Printing can only be performed when the printer is in the Direct Mode
(see Chapter 3).
During printing, the optional display shows the quantity of printed
labels or similar:
The operator can temporarily pause the printing by pressing the Pause
key. This is indicated in the display like this:
The operator can also cancel the printing of the remainder of a batch
print job by pressing the Cancel key for more than 2 seconds.
When the printing is completed, the display shows: