Ironman Fitness Recumbent Bike ODYSSEY - Manual (Page 10)

www.ironmanfitness.com
10 Assembly
Step 1:
Connect the sensor wire (e3) and the pulse wire (e2)
with the corresponding wires on the console (G).
Step 2:
Remove 2 screws (G2) from the back of the console (G).
Step 3:
Gently push all wires into the upright post and attach the
console to the console mounting plate at the top of the
upright tube (e). Secure with 2 screws (G2) to keep the
console in place.
5
G
M3
E2
E3
M2
M1
G2
Use Tool
6mm
ASSEMBLY FOR WATER BOTTLE
Step 1:
Remove 2 screws (M2) from the upright post (e).
Step 2:
Install water bottle holder (M1) on the upright post and
secure it using 2 screws (M2). Place the water bottle (M3)
into the water bottle holder (M1).