Ironman Fitness Recumbent Bike ODYSSEY User Manual
Page 7
7
Assembly
2
www.ironmanfitness.com
B
A
B20
A10
N7
C
N2
N3
N1
N2
N3
ASSEMBLY FOR FRONT & REAR
MAIN FRAME
Step 1:
Connect the front (A10) and rear (B20)
pulse wires together.
Step 2:
Attach front (A) and rear (B) main frames
together, making sure all wires are lined up
correctly so that they are not pinched when
assembling the two frames together. Then,
secure the frame connection at the top
and the 2 sides using 4 allen screws (N1),
4 spring washers (N2) and 4 flat washers
(N3).
ASSEMBLY FOR FRONT STABILIZER
Secure the front stabilizer (C) to the main
frame (A) using 2 allen screws (N7), 2
spring washers (N2) and 2 flat washers (N3)
Note:
After you finish the assembly for front and rear stabilizer bars in order to add stability to
the unit, you may need to adjust the levelers that are located on the bottom of the unit.