InFocus X6 - Manual (Page 13)

2 English ...
Operation
Powering On the Projector
1. Remove the lens cap. 
2. Ensure that the power cord and signal cable are securely
connected. The Power LED will turn flash blue.
3. Turn on the lamp by pressing “Power/Standby” on the
control panel.  The startup screen will display for about 25
seconds and the Power LED will turn blue.
4. Turn on your source (computer, notebook, video player,etc.)
The projector will detect your source automatically.
 If you connect multiple sources at the same time, use the
“source” on the remote control or use the “computer“,
”video 1”, “video 2“ on the remote control to switch.
Powering On/Off the Projector
 Turn on the projector
first and then the signal
sources.
Power/Standby
Lens Cap
2
1