InFocus X6 - Manual (Page 5)

 English ...
Usage Notice
Important Operating Considerations
for Safety
 Place the projector in a horizontal position no greater
than 15 degrees off axis.
 Locate the projector in a well-ventilated area without any
obstructions to intake or exhaust vents. Do not place the
projector on a tablecloth or other soft covering that may
block the vents.
 Locate the projector at least 4' (1.2 m) away from any
heating or cooling vents.
 Use only the power cord provided. A surge-protected
power strip is recommended.
 Refer to this guide for proper startup and shutdown pro-
cedures.
 In the unlikely event of a lamp rupture, particles may exit
through the projector side vents. When the projector is
turned on, keep people, food, and drinks out of the "keep
out" area under and around the projector, as indicated by
the "X" areas below.
Follow these instructions to help ensure image quality and
lamp life over the life of the projector. Failure to follow these
instructions may affect the warranty. For complete details of the
warranty, see the Warranty booklet.
3’ / 1
m
2’ /
0.6
m
5’
/ 1
.5
m
8’ / 2.4
m