Infinity GPS-MIC-1 - Manual (Page 10)

NOTE: Charge the battery pack first for 10 hours before using the unit. The battery will
provide you with 20+ hours in standard operation. (Non power save mode). A battery level
fuel gauge may be found on the unit’s LCD screen.
5.3 Turning the unit on for the first time.
1. With the battery charged, press and hold the Power Button down until the LCD shows the
start up screen. (The Power Button is located on the left hand side of the unit, lower button,
(Button Number 4 as depicted on the table found following these Start Up instructions.)
10
Enter button
Power Button
2. Press the center Joystick Button (Number 9 on the Table) as the [ENTER] button, once
the Infinity Start Up Screen appears.
3. The Unit’s display will then show the Main Menu.