Infinity GPS-MIC-1 User Manual
Page 47
13.2.4 Plug the opposite end of the GPS MIC interface cable to the USB port of
your computer.
13.4 Once the cables are connected to the radio, GPS MIC-1 unit and your PC, turn
the two way radio on to the channel that you will be using.
DO NOT TURN ON YOUR GPS MIC UNTIL INSTRUCTED TO DO SO.
NOTE: The GPS-MIC-1mic needs to be installed in an area that allows the unit
to see a GPS Satellite.
Connect the PC or Laptop to a network connection.
A typical installation is shown as follows (less LAN connection shown).
13.5 Start your PC or laptop computer.
Keep the GPS MIC powered off until the computer is on.
13.6 When your desktop appears turn on the GPS-MIC-1. After the GPS MIC is
fully powered and running, double click on the “Group Viewer” icon on your desktop.
This will load up the GPS mapping application.
47