4 querying the version, 3 configuring parameters, 1 configuring lan – Insignia ICE D-20 EC506 User Manual

Page 21: 4 querying the version -3, 3 configuring parameters -3, 1 configuring lan -3

Advertising
background image

User Guide
ICE D-20 Wireless Broadband Gateway

Table of Contents

Huawei Technologies Proprietary

3-3

3.2.4 Querying the Version

After login to D-20, the steps of entering the version information querying page are
shown as follows.

1) Click

Basic in the operation navigation area.

2) Select

the

Version tab in the user operation area to display the system version

information. See Figure 3-4.

Figure 3-4 Version information

3.3 Configuring Parameters

3.3.1 Configuring LAN

I. Entering the configuration page of LAN

After login to D-20, the steps of entering the configuration page of LAN are shown as
follows.

1) Click

Advanced in the operation navigation area.

2) Enter

the

LAN/Basic page.

In the user operation area, you can configure the following parameters including the
LAN interface IP address of D-20, subnet mask, and the relative configuration item of
DHCP. Click Apply and then D-20 auto restarts to validate the configurations.
Figure 3-5 shows the configuring page.

Advertising