Iii. restoring the default settings, Iv. rebooting d-20 – Insignia ICE D-20 EC506 User Manual
Page 33
User Guide
ICE D-20 Wireless Broadband Gateway
Table of Contents
Huawei Technologies Proprietary
3-15
III. Restoring the Default Settings
The steps of restoring the factory setting are shown as follows.
1)
Select
Advanced in the operation navigation area.
2)
Select
Admin in the operation navigation area.
3) Select
Restore defaults in the operation navigation area and then click Restore
to restore the default settings. See Figure 3-15.
Figure 3-15 Restoring the default settings
Note:
After setting D-20 to default settings, you need to re-set the parameters of D-20.
IV. Rebooting D-20
The steps of rebooting D-20 are shown as follows.
1) Select
Advanced in the operation navigation area.
2) Select
Admin in the operation navigation area.
3) Select
Reboot in the operation navigation area and then click Reboot to reboot
D-20. See Figure 3-16.