Insignia ICE D-20 EC506 - Manual (Page 27)

User Guide
ICE D-20 Wireless Broadband Gateway
Table of Contents
Huawei Technologies Proprietary
3-9
Figure 3-9 WLAN advanced setting page 2
II. WLAN Advanced Setting Parameter Description
z
Wireless Interface: The SSID and MAC address of D-20, which is used for
identifying D-20. It is not necessary for the user to enter the parameter manually
and the system fills it in automatically.
z
Preamble Type: Two parameters are available, Long and Short. If it is supported
by terminal, to select Short will enhance the performance of WLAN.
z
Max Associations Limit: To set the up limit on the number of the terminal
connecting to D-20 at one time. D-20 supports up to 128 wireless terminals
theoretically to access the Internet through a wireless connection.
z
Mode: Two working modes, listed in Table 3-2. By default, it is Access Point.
Table 3-2 Working mode of D-20
Mode Description
Wireless bridge Bridge mode, used for bridging between two or more APs.
Access point (AP)
Access mode, in which AP and WIRELESS TERMINAL
satisfying the IEEE 802.11b/g can access D-20.
z
Bridge Restriction: Select Disabled to disable wireless bridge restriction. Any
wireless bridge will be granted access. Select Enabled to enable wireless bridge
restriction. Only those bridges listed in Remote Bridges will be granted access.