Integra DTR-7.4 - Manual (Page 68)

68
Enjoying Music in the Remote Zone—Continued
The section explains how to turn on, select an input
source, and adjust the volume for Zone 2.
Note:
To control Zone 2 with the remote controller, you must
first press its Zone 2 button, and then press the next but-
ton within five seconds (i.e., while the DTR-7.4’s
Standby indicator is flashing).
Notes:
• If the Sleep function has been set, any Zone 2 compo-
nent will turn off along with the DTR-7.4 when the
specified sleep time expires. To use the Sleep function
with Zone 2 only, set the Sleep function and then set
the DTR-7.4 to Standby.
• Only analog input sources are output by the PRE OUT
SURR BACK/ZONE 2 outputs and the SURR BACK/
ZONE 2 SPEAKERS terminals. Digital input sources
are not output. If no sound is heard when an input
source is selected, check if it’s connected to analog
inputs.
• Since the Zone 2 function and the REC OUT outputs
use the same circuitry, if the Rec Out button is pressed,
Zone 2 will be turned off.
• When the SURR BACK/ZONE 2 outputs (SPEAK-
ERS/PRE OUT) are set to Zone 2 (page 67), listening
modes that need surround back speakers (i.e., Dolby
Digital EX, DTS-ES, and THX Surround EX) are not
available.
• While Zone 2 is active, functions will not work.
• While Zone 2 is active, the Pure Audio listening mode
cannot be selected for the main room.
• You can’t select different radio bands for Zone 2 and
the main room. For example, if you select FM for the
main room, then FM will also be selected for Zone 2.
Enjoying Music in the Remote Zone
1 Point the remote controller at the
DTR-7.4 and press the Zone 2
button followed by the On button.
This activates Zone 2 and, if connected
to the DTR-7.4’s 12V TRIGGER OUT,
turns on the Zone 2 amp.
To do this on the DTR-7.4, press
the Zone 2 button.
2 To select the Zone 2 input source
with the remote controller, press
the Zone 2 button and then roll
the scroll wheel.
The name of the selected Zone 2 source
appears on the display.
To do this on the DTR-7.4, press
the Zone 2 button, and then press
an input source button within
eight seconds.
If you select AM or FM, you can use
the remote controller’s CH/Disc +/–
button to select the presets.
To set the main room and Zone 2
sources simultaneously, press the Zone
2 button repeatedly until “Z2 Sel:
SOURCE” appears on the display.
Now use the scroll wheel or input
source buttons to select the source.
Master Volume
Tape Tuner Phono Net Audio CD Video 1
VCR 1
Video 3 Video 2
VCR 2
Video 4 Video 5 DVD ) N ) D
A-FO RM Listening Mode Memory
Video 5 Input
Stereo Direct / Pure Audio DSP Surround THX
Clear
Rec Out Zone 2 Of f
Setup Tuning
Preset
Enter
Return
Dimmer Display
S Video Audio Video L R
Memory FM Mode
DTR-7.4
Digital
--/---
@. - ' / ABC DEF
PQRS TUV WXYZ
GHI JKL MNO
TV CH
TV VOL
RC- 550M
+10 0
1 2 3
4 5 6
7 8 9
THX
DSP DSP
+
-
+
-
Direct Tuning
Caps Delete Language Loca t ion
Album Ar tist Genre Playlist
Custom
Display
Dimmer
T V
Input
Sleep
Muting
Angle Subtitle Audio
Memory Search A-B Repeat
T V On Standby
Audio AD J
Exit Gu ide
Random Step / Slow Rec
Last Memory
Clear
Input
To p M enu Men u
Set up Retu rn
Zone 2
Input Mode
Macro
CH VOL Disc
Test Tone CH SEL
Pure A
Surround
Direct
Stereo
Re-EQ
All CH ST
Level + Level -
L Night Audio SEL
Enter
Zone 2
Level –/+
Standby
Zone 2
On
Input source
buttons
Scroll wheel
Zone 2
On
Zone 2
3 To adjust the Zone 2 volume with
the remote controller, press the
Zone 2 button, and then use the
Level –/+ buttons.
To do this on the DTR-7.4, use the
or cursor buttons.
If your Zone 2 receiver/integrated amp
is connected to the DTR-7.4’s AUDIO
ZONE 2 OUT L/R outputs, use the vol-
ume control on the receiver/integrated
amp.
4 To turn off Zone 2 with the remote
controller, press the Zone 2 but-
ton followed by the Standby but-
ton.
To do this from the DTR-7.4,
press the Zone 2 button, and then
press the Off button within eight
seconds.
Zone 2
Level + Level -
Zone 2
Standby