Inter-Tel INT4000 - Manual (Page 44)

32 INT4000 Cordless Telephone User Guide
U
SING A
H
EADSET
With an electret headset, you can talk on the phone handsfree, without using your
speaker and microphone.
NOTE: If your headset has a power-saver mode, make sure the System Administrator
has the Headset Connect Tone flag enabled in the telephone system. If this flag is not
enabled, you may miss the first few seconds of incoming calls.
To connect a headset:
1. Insert the headset plug into the vacant handset jack.
2. Enter the Headset On feature code ( ) or the Headset On/Off feature
code ( ). The display shows HEADSET MODE ON.
To disconnect a headset:
1. Plug the coiled handset cord into the vacant jack.
2. While on-hook, enter the Headset Off feature code ( ) or the Headset
On/Off feature code ( ). The display shows HEADSET MODE OFF.
3 1 5
3 1 7
3 1 6
3 1 7