InFocus TD40 NTSC - Manual (Page 22)

21 OWNER'S MANUAL
Turn on the Set Top Box.
Press INPUT button on the remote control
of the Monitor and select Component1,
Component2, PC or DVI.
Connect Set Top Box video inputs to AV, COMPONENT, PC or DVI jacks on the Monitor.
Audio inputs to Audio sockets beside the L (White) and R (Red) audio jacks which you connect video inputs.
How to connect
1
2
How to use
How to connect
With Component
Connect a three separate component cables to the component jacks of the STB and the Monitor.
Connect L (White)and R (Red) sound cables (composite) to the sound jacks of the STB and the Monitor.
With RGB(D-Sub) or DVI
Connect a D-Sub or DVI cable to the AV video jacks of the STB and the Monitor.
Connect L (White)and R (Red) sound cables (composite) to the sound jacks of the STB and the Monitor.
• Component, PC and DVI ports can be displayed only 1 signal among them. If one of them is being displayed, other
sockets are unavailable.
Supported Signals
480i/60Hz
480p/60Hz
576i/50Hz
576p/50Hz
720p/50Hz
720p/60Hz
1080i/50Hz
1080i/60Hz –
–
–
–
Component1 Component2 PC DVI
Connecting the Set Top Box