InFocus TD40 NTSC - Manual (Page 28)

27 OWNER'S MANUAL
The Fine Tuning function lets you manually adjust the Monitor's tuner if you have difficulty tuning analog
Channels. Press Menu/set button to display the main OSD menu.
Press Menu/set button to display the main OSD menu.
Select the TV main menu item.
Press Menu/Set to enter the Fine tune sub menu.
Select Fine tune with CH+/CH- button and press
Menu/Set button. Then you can see the adjust bar.
Adjust the fine tune with VOL+ or VOL- button.
Digest
In the Digest function, you can watch 15 programs at the same time. (This function works only in TV mode)
Press the Digest button on the Remote Control.
By pressing the channel number, the selected channel
becomes main window.
You can make off the Digest Function by pressing
Digest button again.
1
2
3
4
5
Fine Tune 30
:Move Menu/Set : EXIT
Channel Type ¥CATV Š
Auto Scan
Fine Tune
CH ¥CATV 5 Š
1
2
3
Fine Tune
Setting the Channel