Intel SC5275-E - Manual (Page 33)

2 Setting Up the Chassis
Intel® Entry Server Chassis SC5275-E User Guide 15
8. Slide the drive into the chassis. When properly positioned, the holes in the side of the drive
align with the threaded holes in the chassis frame.
9. Secure the drive to the side of the chassis with two screws. Note that only two screws are
required at the left side of the chassis to secure the device to the chassis. Tighten the screws
firmly.
10. Connect the data and power cables to the drive.
TP00060
B
Figure 7. Installing a Floppy Drive
Peripheral Drives
Device Installation Considerations
The number of devices you can install depends on:
The number supported by the bus on your server board
The number of physical drive bays available
The combination of SCSI and IDE devices
The amount of power required by other components in your chassis.