Peripherals, Inch removable media drive bays, Inch hard drive bays – Intel SC5275-E User Manual
Page 23: Optional 3.5-inch hot swap drive bay, Accessories and order codes, Table 3
1 Chassis
Description
Intel® Entry Server Chassis SC5275-E User Guide
5
Peripherals
5.25-inch Removable Media Drive Bays
The upper bays are designed for removable media peripherals. You can install up to two
half-height peripherals.
3.5-inch Hard Drive Bays
The chassis supports up six drives depending on the power budget. The drives are installed into a
removable hard drive bay cage that is located beneath the floppy drive bay. The hard drive bay
cage is not externally accessible.
Optional 3.5-inch Hot Swap Drive Bay
The optional hot swap drive bay upgrade supports up to six 3.5-inch SCSI hot-swap hard drives.
Five bays are included with the upgrade kit. If no drive is installed in a carrier, a plastic air baffle
must be installed to ensure proper hard drive cooling.
The SCSI hot swap drive bay accepts 1-inch peripherals that consume up to 18 Watts of power.
Accessories and Order Codes
For a complete list of spares and accessories, see
http://www.intel.com/go/serverbuilder
Table 3.
Accessories and Order Codes
Accessory Order
Code
SCSI Hot Swap Drive Bay Upgrade Kit*
AXX6SCSIDB
SATA Hot Swap Drive Bay Upgrade Kit*
AXX6SATADB
Intel® Workstation Cooling Kit
APT2WKTCOOLKIT
ICMB Board Kit*
AXX2ICMBKIT
External SCSI Adapter Cable*
AXXEXTSCSICBL
* Not available for use with all server boards.