Intel SC5275-E - Manual (Page 52)

3 Maintaining Your Server
Intel® Entry Server Chassis SC5275-E User Guide 34
Replacing the Front Panel Board
1. Remove the left access cover.
2. Remove the bezel.
3. Remove the two screws at the rear of the chassis that hold the right access cover in place.
4. Remove the right access cover. A rectangular opening at the right side of the chassis provides
access to the front panel board.
TP00069
A
B
A. Right side of chassis, access cover removed
B. Access to Front Panel Board
Figure 19. Front Panel Board Access
5. Disconnect the front panel cable from the front panel board.
6. Remove and save the three screws holding the front panel board to the chassis. See number 1
in the figure below
7. Remove the front panel board through the access hole. See number 2 in the figure below
TP00064
1
A
B
2
A. Right side of chassis
B. Front of chassis
Figure 20. Removing the Front Panel Board