Interquartz IQ750 - Manual (Page 22)

22
6. MEMORY OPERATION
MEMORY STORAGE
Model IQ750 has 20 Direct Access Memories, 100 Directory Memories, 80 incoming call
Caller List and 5 Last Number Redial Memories. All memories have a maximum 32 digits
capacity and 16 characters name capacity.
Memory Backup
No batteries are required. The Caller List, Direct Access and Directory Memories are
non-volatile (no batteries needed to retain contents in the event of power failure).
Memory Storage
Storage operations can be carried out either with the adaptor connected or with batteries
installed.
To enter letters for name entries, use the letters marked on the keys. For example, press
key 7 (P, Q, R, S) once to enter P, twice to enter Q and so on. To make a space, press
the right hand ( ) Cursor key.
To commence a storage procedure, lift the Handset or press HANDSFREE/HEADSET
before commencing the procedures described for storing numbers and names as
described below. To delete any incorrect digits while storing, use the Cursor or move to
the unwanted character and press CLEAR.
DIRECT ACCESS MEMORY KEYS
The IQ750 has 20 Direct Access speed-dial memories accessible via 10 keys near the
DISPLAY (see Figure 2A). These keys each have five “One-Touch” memories and five
“Two-Touch” memories. The One-Touch memories are accessed by pressing the key
once briefly during the storage or retrieval procedures described in this manual. The Two-
Touch memories are accessed by pressing the same memory key twice in quick
succession.
The Direct Access memories are very useful for storing some of your favourite network
facility codes (e.g. Diversion, Call Forward, Call Back etc). Consult your system User
Guide for the codes that you need to store to activate these functions.