Interquartz IQ750 - Manual (Page 34)

34
8. ADVANCED NETWORK OPERATION
Where this telephone is used on an intelligent network such as Easycall, Customnet,
Centel, Spectrum, a PABX or any Centrex Networks, the following information may be
useful.
Message Waiting function in conjunction with Telstra’s Customnet, MessageBank
and Home Messages 101 services
The IQ750 has built-in compatibility with the above services. When the Message Waiting
signal is received:
1. the CALLER key will flash
2. the display will show the words “Message Waiting” in the name field
3. the display will show an envelope icon.
Manually Resetting the Message Waiting Prompts
The message waiting prompts as described above are normally controlled by the network
to switch on and off as needed. If at any stage the telephone is found to be incorrectly
indicating a Message Waiting condition, the erroneous indication can be cleared manually.
To clear the MWI prompts; press CLEAR twice.
“Talking Text” SMS Messages
The IQ750 is compatible with the “Talking Text” SMS service. To access messages,
please refer to the guidelines issued by your service provider.
HOLDING AND TRANSFERRING CALLS -This is dependent on your system type, so
please check your system’s Extension User Guide to find out how to use the RECALL
Key. It is sometimes known as the Flash or Facility Key.