Insignia NS-CL02 - Manual (Page 12)

12
Insignia NS-CL02 CD Clock Radio
www.insignia-products.com
2 Insert two (2) AAA batteries into the battery compartment. Make
sure that you match the + and – symbols on the batteries with the
+ and – symbols in the battery compartment.
3 Reinstall and close the battery compartment and return your clock
radio to the upright position.
Connecting the power cord
To prepare your clock radio for use:
1 Make sure that your local AC power source matches the voltage
shown on the plate located on the AC power adapter. If it does not,
consult your dealer or service center.
Caution
Follow these precautions when using batteries in this
device:
1. Use only the size and type of batteries specified.
2. Make sure that you follow the correct polarity as indicated
in the battery compartment when installing batteries.
Reversed batteries may cause damage to the clock radio.
3. Do not mix different types of batteries together (for
example, alkaline, rechargeable, and carbon zinc), or
semi-used batteries with fresh ones.
4. If your clock radio is not to be used for a long period of
time, remove the batteries to prevent damage or injury from
possible battery leakage.
5. Do not try to recharge batteries not intended to be
recharged, because they can overheat and rupture. (Follow
battery manufacturer’s directions.)
6. Do not throw batteries into a fire. Dispose of used
batteries as hazardous waste.
Note
The batteries are used to provide backup for your clock
when AC power adapter is disconnected or there is a power
failure.
When the battery indicator
appears in the display, you
need to replace the batteries.
1.5V X 2 1.5V X 2
AAA/UM-4 AAA/UM-4
Insert batteries as shown