Using your clock radio, Dimmer setting, Playing the radio – Insignia NS-CL02 User Manual
Page 13
13
Insignia NS-CL02 CD Clock Radio
www.insignia-products.com
2 Plug the small connector on the power cable into the DC IN jack
on the back of the clock radio and the AC power adapter itself into
an AC power outlet.
Using your clock radio
Dimmer Setting
To set the backlight level:
1 Make sure the AC adapter is connected and the clock radio is
turned on.
2 Slide the dimmer switch to set the display backlight to a
comfortable level. Your choices include High, Mid, or Low.
Playing the radio
To play the radio:
1 Press
(Standby/on) to turn on the clock radio.
•
To select the radio band you want to listen to, press STOP/
BAND/TIME SET
repeatedly.
•
To tune the radio up or down and select the station you
want, press SKIP +/FF/TUNE UP or SKIP–/FR/TUNE
DOWN.
•
To adjust the volume to a comfortable level, press either the
VOLUME UP or VOLUME DOWN button.
•
To scan to a higher or lower frequency, press and hold SKIP
+/FF/TUNE UP or SKIP–/FR/TUNE DOWN for more than
two seconds, then release the button to search for the next
strong station.
•
To select FM MONO or FM STEREO, press MODE .
2 Press
(Standby/on) to turn off the clock radio.
To use presets:
1 Press
(Standby/on) to turn on the clock radio.
2 Press STOP/BAND/TIME SET repeatedly to select the radio band
you want to listen to.
3 Press SKIP +/FF/TUNE UP or SKIP–/FR/TUNE DOWN to tune
the radio up or down and select the station you want.
Caution
To protect your clock radio during thunderstorms, unplug the
AC power adapter from the AC power outlet.